Blog

7 incredible inventions those with a passion for renewable energy will appreciate

Renewable energy is incredible. It’s good for the environment, it’s good for our conscience, and it’s good for our lungs. As renewable energy fanatics, we love scouring the internet for new and interesting inventions that are made with the advancements of technology. Here is a list of 7 that we found particularly striking:

1. Solar Roadways

Solar Roadways is a project by a team of Canadian entrepreneurs. It is an alternative to traditional asphalt roads and uses electrical energy generated from solar panels instead of gasoline or diesel fuel. The team has been working on the idea for over 10 years and now finally hopes to bring their idea into reality. The idea behind this project is that roads can be made out of solar panels which would generate electricity, allowing them to run on sunlight rather than petrol or diesel fuel which would reduce the environmental impact as well as save energy costs for cities, towns, villages,

2. The “Wind Floor” Giant Wind Turbine Made of Plastic

The main idea behind this project is to make a giant wind turbine out of plastic and recycle it to create a floor. The design is based on the concept that “wind is free” and therefore people should not have to pay for electricity generated from it. This concept challenges the belief that conventional methods of power generation are more efficient than renewable sources like wind power.

3. Electric Airplanes

Electric airplanes are a new technology that promises to make air travel more environmentally friendly and less polluting. They use the power of the wind and solar energy to fly. The electric motors, propellers, and even the wings on these planes also run on electricity. This means these airplanes will not produce any emissions during flight.

With electric airplanes, we will be able to explore our planet more than ever before without causing harm to its ecosystem or damaging our environment in any way.

4. Solar Gardens

Solar Gardens are an all-in-one self-sufficient home. This concept is very much like the treehouse, but it will provide you with much more than just a structure to live in. It will also provide you with everything that you need to survive and thrive. Solar Gardens will be designed so that they can grow their own food, generate their own power, and purify their own water supply for their residents. They will also be able to recycle waste into usable resources for other things, such as fertilizer or fuel.

5. Tesla’s Solar Roof Tiles

Solar panels have been around for decades and were seen as one of the most viable eco-friendly options out there. However, Tesla’s solar roof tiles offer a new approach by blending with existing roofs without completely replacing them.

Tesla’s solar roof tiles offer a solution to the power issue that many people face. It is viewed as a great alternative to traditional roof tiles, as they are designed to collect and store power from the sun.

6. Seawater Greenhouses

A seawater greenhouse is a structure that is set up around an underwater greenhouse to make the most out of the natural sunlight available.

These structures are usually built on the coast or on offshore islands and offer an alternative or supplement to more traditional greenhouses.

As more people are looking for less expensive ways to grow food, seawater greenhouses are becoming more popular as they can be relatively cheaper than other methods.

7. 3D Printed Homes

3D-printed homes actually exist, and are made up of 3D-printed parts that can be customized based on need and taste. This allows the design to be unique and personalized for each homeowner. What’s more, the materials that are 3D are in fact more durable than manufactured materials. 

That’s all for today: 7 great inventions for those of you who appreciate renewable energy, just like us! Got any more you know? We’d love to know about them, so please reach out if you can think of some! 

Best tips for finding an energy-efficient home

If you care about the environment, and you want to find a new home, you have come to the right place. Our slogan at Ecne is to “Save mankind by saving energy,” and we believe there’s a lot we all can do personally to help in the global cause of reducing carbon emissions. in this article, we will go into some of the simple things you can to do find an energy-efficient home. 

Ask a few questions

When you consider buying a new home, there are a few questions you should ask the person who is selling it: 

  • “Have you isolated the home lately, or replaced any doors or windows?” 
  • “Is there a heat pump in the house?”
  • “In general, does this house have LED lights or traditional lights?”

In general, you want to ask about the kinds of things that will help reduce the home’s need for electricity. 

home

Choose the right real estate agent 

The topic of this article is actually not that new to us. For years, we have been receiving questions from readers who want tips on finding an environmentally friendly home. Luckily, we have several researchers who go scour the internet for better ways of saving energy. 

One of the most interesting tips we learned about finding an energy-efficient home was given to us by our Norwegian researcher. She read an article by the Norwegian company Eiendomsmegler For Deg, who specializes in comparing real estate agents. In their article, Hva koster en eiendomsmegler, they say that price isn’t everything when choosing a real estate agent. It’s not all about picking the “best” or the “cheapest” or the “most professional” one.  Rather, choose the one who understands your values and, in our case, how important it is for you to have an energy-efficient home. 

The best deal isn’t necessarily the one that saves you the most money or brings you the newest house, but the one that makes you the happiest with the big choice that you’ve made. 

Releated: see our article about everything you must know about electrical energy and power

Everything doesn’t have to be right from the start

Our last tip is that whereas it’s ideal to find a home that’s as energy-efficient as possible from the start, everything doesn’t have to be right from the beginning. All you need is a place that has potential. 

So you should pick something that already has some or many of the components you’re looking for, but also be willing to make some changes to the home yourself. It’s part of the process!

Electrical Energy and Power: All You Need to Know

There is a lot of confusion when it comes to converting energy and power to electrical energy. That is because electrical power and energy are slightly different from what we commonly understand in our daily life.

All the Information You Need

The electrical energy is obtained from the electric potential difference between the two, P = I/R, where V is your potential difference, and I is the conductivity. We already know that the strength of an electric current is always inversely proportional to the wire resistance. This means that the harder the wire is to conduct, the weaker the electrical current.

It is then important to define the units of measurement for the electrical energy transfer, such as amperes or kilo amps. Then we need to convert this to watts, and finally, we need to convert this into milliamps. Thus, we get the level of electrical energy transfer that we desire.

Electrical Energy

As we have established, we want to convert the energy and power into electrical energy per unit of time. Therefore, we must measure the amount of time needed for the process to occur. We can use resistors and capacitors to do this.
Many individuals mistakenly believe that the power industry is primarily interested in generating fossil fuel that can be used for the generation of electricity. However, the primary objective of the power industry is to generate clean-burning renewable energy that can ultimately reduce the dependence on fossil fuels.

Solar and Wind Energy

Although solar energy and wind energy are often used in electricity generation, these types of sources have much greater variability and are very expensive to generate. Although wind and solar power technology have advanced greatly, many factors, such as surface roughness, turbulence and shading, can significantly decrease the efficiency with which they operate. As a result, the cost of producing these types of energy is still very high relative to other alternatives.

Electrical Energy

Renewable Forms of Energy

The second point to note that is that some forms of energy, such as biomass, oil and natural gas, are renewable forms of energy that are widely used. Their use, like the use of coal or petroleum, provides a sustainable source of energy.
The question becomes, when will these sources become insufficient to provide the electrical energy needed by our society? At the current growth rate of fossil fuel production, the Earth’s non-renewable resources will likely run out in our lifetime. This fact also leads us to another important question; what would happen if we dramatically decreased the growth rate of these non-renewable resources?

The third point relates to the level of pollution that is associated with the production of electrical energy. The combustion of fossil fuels produces carbon dioxide, nitrogen oxide and other pollutants, which are potentially harmful to the environment.

In addition, the exhaust from the combustion of fuel also produces heat, which is potentially damaging to the structures in which the fuel burns. The overall impact of increased combustion energy output and waste heat is a potential difference between the amount of electrical energy produced and the amount of waste created.
While increased levels of energy production may theoretically reduce the amount of waste, it is likely that the increased cost of electricity generated through increased usage of energy could lead to an increase in the creation of waste.

Electrical Energy

Thermal Energy

Another potential difference between electrical energy and power produced through thermal energy is that of potential energy. In a thermal power generation system, heat is used to create mechanical power, such as through the rotation of a turbine or an alternator.

Unlike electricity, which is composed primarily of a chemical charge, mechanical energy is composed mainly of an electro-mechanical charge. A purely electrical system cannot provide any source of potential energy. In a thermal power generation system, however, heat is used as a source of potential energy, which may be converted into electrical energy through the use of a transfer device.

Motive Power

One final potential energy difference between electrical and thermal is that of motive power, which is defined as the force that propels an object with no internal force acting on it. Mass, momentum, and velocity are the three forces that provide this force.

Electrical Energy

In terms of an object’s motion, it is a measure of the time it takes for it to move from point A to point B without undergoing any friction. If there is no such source of potential energy, then the speed at which it moves must be determined by something external, such as gravity or microwaves. This can be a highly complex concept, but it can be simplified using the law of conservation of Energy.

Basically, conservation of energy requires that an object conserves every bit of its own heat or potential energy. It also requires that it never loses any of its momentum. The conversion of one form of electric energy to another is known as transformation. There are two types of thermodynamics: kinetic energy and potential energy, and both depend solely on the transfer of energy.